Boosted Board Change your Mini S to a Mini X / convert a V2-V3 to a Mini X

Description

This is for current Boosted Board Owners who want to convert there long board or Mini S to a Mini X with out spending a lot. You can have 2 Boosted Board setups using the same drivetrain, Battery, and remote for both.
Boosted Board Mini X Conversion Kit Everything U need to convert a Boosted V2 dual, V2 dual plus, V3 Plus, V3 stealth, or Mini S to a Boosted Mini X Electric Skateboard.
Kit contains Mini X Deck, Mini X motor controller (ESC), tail puck, and Mini X risers.
If your looking to upgrade your mini S to the faster Mini X. Or you want a Boosted Board you can take on an airplane. Or if you want to convert your V2 or V3 Boosted Board to a mini X, or you just want to change up to a smaller deck. Or you want a more travel friendly Boosted Board... YOU CAN! with out buying a whole new board. (Most airlines allow the SR Battery Only) check airlines.
This will work with:
V2 Dual, V2 Dual Plus, V3 Plus, and a V3 Stealth.
Use your current drivetrain, remote, and Battery.
All you do to convert is:
1. Disconnect your motors from your current boards ESC.
2. Remove your trucks with 4 bolts each from your current Deck. Keep drivetrain intact.
3. Re-install trucks with drivetrain intact.. to the Mini X Deck using the Mini X risers provided. (You may add your risers on top of the mini X risers if you use a larger wheel then 80mm)
4. Reconnect motors to the Mini X ESC
5. Remove your battery from your current Board and re-attach to Mini X.
6. Pair your remote to the Mini X ESC. You do this by pressing the battery power button 5 times until it turns blue. Then press your remote button 5 times. Thats it.  Your ready to ride!
Allways check all connections are tight and that you have no wheel rub if using large wheels. Wear your helmet and protective gear!
Questions you may have:
Yes it works with V2, V3, & Stealth remotes.
Yes it works with Boosted SR or XR Batteries
Yes it works with any V2, V3, or Stealth drivetrain
Yes it works with T2 or T3 motors
Note:
When you convert Make sure you dont have wheel rub on the deck. The Mini X uses 80mm wheels. Most Boosted Longboards use 85mm wheels. V2 or Mini S. owners use 80mm wheels which is the same as Mini X.wheels.
If you use a 85mm wheel or larger with this kit you may need to tighten your trucks. Depends how loose you keep your trucks. If you like your trucks real loose or if you want to use larger wheels like 97mm or Boosted 105s you can add your current boards risers on top of the risers I included in the kit. Make sure the risers I included are on the bottom because they are shaped to fit the Mini X
I posted pics of a V2 conversion, a V3 Plus conversion, a Stealth conversion, and a conversion with Boosted 105s.
Condition is "Used". ESC has been tested!everything works as it should. Low mileage and in great shape! (I have all serial #s recorded)